New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
-
Turn air distribution rotary knob to left onto stop.
-
Attach end of cable -1- to the temperature flap lever -3-, arrow -A-.
-
Press footwell/defrost flap lever onto stop arrow -C- and attach outer cable -1- with clip -2-, arrow -B-.
-
Turn air distribution rotary control knob to left and right onto stops.
When turning the rotary control knob both end stops must be reached.
Fig. 3 Central flap cable, installing and adjusting
Cable sleeve marking: Yellow
Prerequisites:
-
Central flap lever correctly adjusted, refer Fig. 1 in "Heating and Ventilation System, Assembly" See: Service and Repair
-
Heating and ventilation controls are installed.
-
Connecting duct removed. See: Air Duct/Service and Repair
Adjusting
-
Turn air distribution rotary control knob to left onto stop.
-
Attach center wire of cable -2- to the central flap lever -1-.
-
Press footwell/defrost flap lever onto stop arrow -A- and attach outer cable -2- with clip -3-.
-
Turn air distribution rotary control knob to left and right onto stops.
When turning the rotary control knob both end stops must be reached.