New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
Ignition Coil: Testing and Inspection
With Manufacturer's Scan Tool
Ignition Coils With Power Output Stage, Checking
Special tools, test equipment and auxiliary items
-
VAG 1598/31 test box
-
VAG 1526 hand multimeter or VAG 1715 multimeter
-
VAG 1527 voltage tester
-
VAG 1594 adapter set
-
Electrical Wiring Diagrams
Test conditions
-
All fuses must be OK
-
Battery voltage must be at least 11.5 V
-
Camshaft Position (CMP) sensor -G40- must be OK, checking. See: Computers and Control Systems/Testing and Inspection/Component Tests and
General Diagnostics/Camshaft Position (CMP) Sensor, Checking
-
Engine speed (RPM) sensor must be OK, checking. See: Computers and Control Systems/Testing and Inspection/Component Tests and General
Diagnostics/Engine Speed (RPM) Sensor, Checking
NOTE: Ignition coils and power output stages are one component and cannot be replaced individually.
Test sequence
-
Disconnect 4-pin connector -2- from ignition coil with power output stage to be checked -1-.
Checking voltage supply