New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
-
Check wiring between test box and connector for open circuit according to wiring diagram.
-
Contact 1 + socket 72
-
Contact 2 + socket 73
-
Contact 3 + socket 36
-
Contact 4 + socket 35
-
Contact 6 + socket 34
Vehicles with automatic transmission:
-
Contact 5 + socket 33
-
Wire resistance: max. 1.5 Ohms
-
Additionally check the wiring for short to battery positive or Ground.
-
Additionally check wires for short to one another.
If no wiring malfunction is detected:
-
Replace Throttle Position (TP) sensors -G79- and -G185-.
Vehicles with automatic transmission 01M
-
Adapt control module for automatic transmission
Continued for all vehicles
-
Check DTC memory
-
Read readiness code
If the DTC memory has been erased or the engine control module separated from the permanent positive, the readiness code must be generated again.