New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
Indicated on display:
VAG - SELF-DIAGNOSIS
HELP
1 - Rapid data transfer*
2 - Flash code output*
* Appears alternately
NOTE:
-
If display remains blank, check VAG 1551 voltage supply according to wiring diagram.
-
Additional operating instructions can be called up with the scan tool HELP key.
-
The key advances the program sequence.
-
In operating mode 1 "Rapid data transfer" function 00 "Automatic test sequence" can be carried out. The DTC memory of all vehicle control units
is checked automatically with function 00.
-
Switch ignition on.
-
Switch printer on with the Print key (warning lamp in the key will light up).
-
Press key 1 for "Rapid data transfer" operating mode.
Indicated on display:
Rapid data transfer
HELP
Enter address word XX
Press keys -2- and -9- to select "Light control, left" address word "29".
Indicated on display:
Rapid data transfer
Q
29 Light control, left
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
Q
Tester sends address word 29
Control module version, checking
Indicated on display
7M3907391 EVG GDL + Auto HRC 0001
->
Coding 00006 WSC 00000
Upper line:
-
Part No. of control module!
-
System designation (headlight range control)
-
Version number (1))
Bottom line:
-
Coding number (2)
-
Dealership number
1) - Part and version numbers illustrated here are examples only
2) - Dependent on type of drive
-
Press -> key.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press keys -0- and -8- to select "Read measuring value block" address word 08.