New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
-
Press seal in onto limit stop using press sleeve T10071/3 and bolt M8 x
Installing seal with annular spring
-
Lightly oil sealing lip of oil seal.
-
Install guide sleeve 3241/2 onto camshaft journal.
-
Slide oil seal over guide sleeve.
-
Press seal in onto stop with press sleeve 3241/1 and bolt 3241/3.
Continued for all seals
-
Insert Camshaft Position (CMP) sensor hood into notch in inlet camshaft.
-
Install washer (taper facing outward) and tighten securing bolt to 25 Nm.
-
Install housing for Camshaft Position (CMP) sensor and tighten to 10 Nm.
-
Install upper toothed belt guard.