New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
^
Over the counter (after market) parts.
When testing or charging a battery either installed or removed from vehicle select appropriate battery type:
^
Select "Standard" (Lead-Acid) function for ALL NON-AGM batteries.
^
Select "AGM"function for Absorbent Glass Mat (AGM) batteries with "AGM" on battery label.
Always use actual DIN rating as shown on battery label -arrow-.
Tip:
Label shown is for example only. DIN or SAE specifications may vary from battery to battery.
If DIN rating is not shown:
^
Use SAE value as printed on the battery label.
If using SAE value rating:
^
Midtronics tester menu option must be changed to achieve accurate results.
^
A change from DIN to SAE can be made from the "Other" menu option on Midtronics tester.
2-2 B6 Passat, Passat Wagon and CC with 3.6L 2006-2010 (Rear Battery)
Testing/Charging at Battery
Tip:
DO NOT remove battery from vehicle to test; always test battery in vehicle except for the following conditions:
^
Battery was removed for a separate repair prior to performing battery test.
^
Over the counter (after market) parts.
B6 Passat Sedan, CC, 3.6L only 2006-2010:
^
Select Lead Acid Battery for 3.6L engine (located in left side of trunk). 450 DIN.
B6 Passat Wagon 3.6L only 2006-2008:
^
Select AGM (Absorbed Glass Mat) for 3.6L engine (located in left side of trunk). 480 DIN or 520 DIN.
When testing or charging battery installed in vehicle:
^
DO NOT Test/Charge from Remote Location.