New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
-
With TDI engine
-
Servicing refer to Brakes and Traction Control.
CAUTION:
-
Do not loosen the brake hose when working on the front suspension
-
Suspend the brake caliper using a piece of wire or similar
-
Do not allow the caliper to hang by the brake hose. The unsupported weight can stretch and damage the hose.
13. Ventilated brake disc
14. Wheel bolts
-
120 Nm (89 ft. lbs.)
15. Self-locking 12-point nut
-
Always replace
-
Tightening refer to Drive Axles, Bearings and Joints.
16. Phillips-head screw
-
4 Nm (35 inch lbs.)
17. Brake carrier
18. Brake caliper
-
Vehicles with 110 kW (150 Hp) gasoline engine
CAUTION:
-
Do not loosen the brake hose when working on the front suspension
-
Suspend the brake caliper using a piece of wire or similar
-
Do not allow the caliper to hang by the brake hose. The unsupported weight can stretch and damage the hose.
19. Self-locking combi bolt
-
125 Nm (92 ft. lbs.)
-
Clean ribs on under side of bolt head
20. Wheel bearing housing
-
Vehicles with 110 kW (150 Hp) gasoline engine
21. Self-locking nut
-
45 Nm (33 ft. lbs.)
23. Self-locking nut
-
Always replace
-
45 Nm (33 ft. lbs.)
24. Hex bolt
-
Always replace
25. Socket-head bolt
-
8 Nm (71 inch lbs.)
26. ABS wheel speed sensor
27. Drive axle
Fig. 1 Pressing wheel hub out of wheel bearing housing
Fig. 2 Pulling bearing inner race out of wheel hub