Passat (B3)
Removing and installing bonnet lock cable |
1 - | Release lever |
q | Cable attached. |
2 - | Self-tapping screw |
3 - | Sealing grommet |
4 - | Clip |
5 - | Guide |
6 - | Cable clip |
7 - | Hexagon head bolt (self-locking) |
q | 12 Nm |
q | If reusing: clean thread of bolt using wire brush and use tap on nut thread; coat bolt with locking compound -D 185 400 A2-. |
8 - | Lock |
q | Cable attached. |
9 - | Cable |
q | Renewing - Unscrew release lever and lock, detach cable. |
q | Attach draw string - approx. 1000 mm long - or similar to cable nipple (release lever) and pull out cable from engine compartment. |
q | Use draw string or similar to help pull in. |