Checking anti-theft device |
l
| Doors, rear lid and fuel tank flap are closed. |
l
| Door windows completely opened. |
–
| Close the driver's door with the key and pull up all locking buttons within 12 seconds. |
l
| The pump should start running 12 seconds after locking the door, and all doors will be locked again. |
–
| After another 15 seconds, pull up all locking buttons, one after the other (no earlier than 24 seconds after locking door with key). |
l
| It should not be possible to pull locking buttons to unlocked position; pulling up by approx. 8 mm is permissible. At the same time, the pump should run up and the respective locking button should retract again. |
l
| The first time the locking button is pulled, a locking noise will be heard (safety coils block locking rods). |
l
| Doors are locked and secured, rear lid is locked and fuel tank flap is engaged. |
Repeat the test procedure for the passenger's door. |
|
|
|