Passat (B3)
| Removing |
| – | Remove sill panel strip. |
| – | Loosen securing nut -2- (23 Nm); tensioner unit -3- is thereby detached and safe. |
| – | Remove front fitting → Chapter. |
| – | Remove cover cap from guide fitting and unscrew guide fitting. |
| – | Remove upper and lower B-pillar trim. |
| – | Remove belt guide. |
| – | Unscrew belt reel -1- (bolt -5-, 40 Nm). |
| – | Pull out tensioner unit -3- from bracket -4-. |
