Passat (B3)
| Repairing door lock with actuating components |
| 1 - | Locking button |
| 2 - | Inner release handle |
| q | Removing → Chapter |
| 3 - | Base |
| 4 - | Door handle |
| q | Removing and installing → Chapter |
| 5 - | Clip |
| 6 - | Base |
| 7 - | Combi bolt |
| q | 7 Nm |
| q | Right combi bolt with left-hand thread, matt black |
| 8 - | Countersunk bolt |
| q | 20 Nm |
| 9 - | Dished washer |
| q | Edge must point outwards |
| 10 - | Plastic washer |
| 11 - | Striker pin |
| q | 50 Nm |
| 12 - | Door lock |
| q | Removing and installing → Chapter |
| q | Tolerance compensation → Chapter |
| 13 - | Base |
| q | Should only be installed with associated door lock |
| 14 - | Connecting lever |
| 15 - | Clip |
| 16 - | Pull rod |
| q | Engage from below in inner release handle |
| 17 - | Locking rod |
| 18 - | Anti-theft device |
| 19 - | Spreader rivet |
| 20 - | Relay lever |
