Passat (B3)
| Removing and installing backrest cover and padding |
| 1 - | Seat cover |
| q | Removing: |
| q | Separate seat frame and backrest frame → Chapter. |
| q | Unhook clip profile → Item completely on underside. |
| q | Sport seat: unhook tensioning wires → Item at securing points → Item. |
| q | Push cover upwards. |
| q | Sport seat: cut through padding clips → Item. |
| q | Unhook padding wire → Item. |
| q | Remove guides → Item and → Item and take off cover. |
| 2 - | Padding wire (normal and sport seat) |
| q | Hooked into padding; hook and unhook using awl -V.A.G 1636-. |
| 3 - | Padding wire (sport seat only) |
| q | Hook in at top on lateral padding wire, at bottom on securing point → Item |
| q | Secure lateral padding wire with padding clips on top cross member → Item |
| 4 - | Padding clips (qty. 3, sport seat only) |
| q | Fit using padding clip pliers -V.A.G 1634- |
| 5 - | Padding |
| 6 - | Backrest frame |
| 7 - | Cross member |
| q | Attachment for padding wires on backrest frame - sport seat only |
| 8 - | Guide (CL equipment) |
| q | To remove, push up cover, press ends of guide together and pull out |
| 9 - | Guide (GL and GT equipment) |
| q | To remove, push back locking lug -arrow- with screwdriver and pull out guide |
| 10 - | Trim (taxi only) |
| 11 - | Cross-head screw |
| 12 - | Protective strip |
| q | Attach with universal adhesive -D 001 200- |
| 13 - | Padding wire securing point |
| 14 - | Clip profile |
| q | Can be found on front and rear side of cover |
