Passat (B3)
| Checking electric drive (zero position) |
| If electric drive is renewed, new unit must be installed in zero position (sliding/tilting roof panel closed). |
| – | Connect wiring harness connector for electric drive to sliding/tilting sunroof. |
| – | Operate switch -1- and count rotations of drive pinion -2-: Zero position of electric drive is between end shutoff points -A- and-B-. End shutoff point -B- is reached by turning drive pinion clockwise and end shutoff point -A- is reached by turning drive pinion anti-clockwise. |
| -A- end shutoff point, panel tilting function = 2 turns to zero position |
| -B- end shutoff point, panel sliding function =∼8.25 turns to zero position |
