volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing upper C-pillar trim > < Removing and installing lower A-pillar trim
Removing and installing B-pillar trim
Removing and installing B-pillar trim
  Note
The trim engages in the sealing flange of the inner door seal, see section A-A.
   
1 - Retaining pin
q   Engages in roof frame
2 - Upper trim
q   To remove, unscrew guide fitting (40 Nm)
q   First pull out upper trim from retaining clip
q   Note upper retaining lugs - engage behind A-pillar trim and C-pillar trim
q   Installing - first fix upper retaining pin in roof frame and slide trim upwards until lower retaining lugs engage trim
q   Push upper retaining pins behind trim
q   Push trim over sealing flange
3 - Operating handle
q   Pull off from height adjustment
4 - Spring clip
5 - Lower trim
q   To remove, sill panel strip must first be removed → Chapter
q   Unscrew front fitting (40 Nm)

   

Removing and installing upper C-pillar trim > < Removing and installing lower A-pillar trim