Passat (B3)
Removing and installing rear shelf and belt reel cover (saloon) |
1 - | Belt guide |
q | Removing → Chapter |
q | Installing - fit to belt reel |
2 - | Inertia reel cover |
q | Removing - unscrew bolt, take out cover upwards |
q | Note retaining clips and locking lugs |
q | On vehicles with padding on lower C-pillar trim - remove padding → Chapter |
q | Installing - secure cover with locking lugs in rear shelf and press onto retaining clips |
3 - | Retaining lugs |
q | Engage in rear shelf |
4 - | Rear shelf |
q | To remove, covers of inertia reels must be removed |
q | Removing - unclip rear shelf at front and pull out from retaining wells |
q | Installing - slide rear shelf with retaining lugs in retaining wells and clip in at front |
5 - | Retaining lugs |
6 - | Retaining wells |
7 - | Clip |
8 - | Securing clip |
q | Fitted to flange (side window) |