volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Parts of cooling system - engine side > < Removing and installing parts of cooling system

Passat (B3)

4-Cyl. diesel engine, Mech.
Removing and installing parts of cooling system
Parts of cooling system body side
 
N19-0005
  • 10 Nm
  • Cover
  • Lock carrier
  • Air ducting
  • Bracket
  • Radiator
    • ◆ Removing and installing
    • ◆ After replacing renew entire coolant
  • Rubber washer
  • V-belt
 
N19-0005
  • Expandable pin
  • Guide ring
    • ◆ Note fitting position
    • ◆ Secured on lock carrier item 6 with clips
  • Additional fan
    • ◆ Removing and installing
  • Fan ring
  • Connector
  • Radiator fan
    • ◆ Removing and installing
  • Expansion tank
  • To coolant pipe
    • ◆  , Item 9
 
N19-0005
  • Cap
    • ◆ Check with V.A.G 1274 and 1274/4
    • ◆ Test pressure 1.4...1.6 bar
  • To connection
    • ◆  , Item 3
  • Lower coolant hose
    • ◆ To coolant pump
      , Item 13
  • Connection
  • O-ring
    • ◆ Renew
  • Retaining clip
  • Upper coolant hose
    • ◆ To connection
      , Item 19
 
N19-0005
  • Thermo-switch (F18), 35 Nm
    • ◆ For electric fan
    • ◆ Switching temperatures:
      Stage 1
           on: 92...97 °C
           off: 84...91 °C
      Stage 2
           on: 99...105 °C
           off: 91...98 °C
    • ◆ Only with optional extras thermo switch (F165) for 3rd stage
      , Item 7

Parts of cooling system - engine side > < Removing and installing parts of cooling system