volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing sealing flanges and flywheel/drive plate > < Checking semi-automatic toothed belt tensioning roller

Passat (B3)

4-Cyl. diesel engine, Mech.
Dismantling and assembling engine
Removing single part injection pump sprocket
  • ‒ Remove injection pump sprocket securing nut.
 
V23-0077
  • ‒ → Loosen puller arms and offer up.
  • ‒ Locate puller arms through holes in injection pump sprocket and tighten.
  • ‒ Place injection pump sprocket under tension with puller.
  • ‒ Release injection pump sprocket from injection pump taper by tapping on spindle of puller -arrow- (thereby hold sprocket so that it does not fall off).

Removing and installing sealing flanges and flywheel/drive plate > < Checking semi-automatic toothed belt tensioning roller