Volkswagen Workshop Service and Repair Manuals > Passat (B3) > Power unit | 4-cyl. fuel injection engine (2-valve), Mechanics | Exhaust system | Removing and installing parts of exhaust system, front wheel drive | Silencer with mountings

4-cyl. fuel injection engine (2-valve), Mechanics

Removing and installing parts of exhaust system, front wheel drive

Silencer with mountings - Engine codes ABS, 2E, ADY, AGG

Note:

Align the exhaust system longitudinally so that the dimensions -a- and -b- are maintained.



Marking ◆ For clamp ◆ Three times on circumference ◆ Distance clamp/marking => Item 14 Separating point ◆ For repair cases ◆ When replacing central silencer ◆ Marked by three impressions on circumference of connecting pipe ◆ Central and rear silencer are installed as one part as standard. In repair cases the central and rear silencer are supplied individually and a repair connecting pipe with two clamps supplied as joint. ◆ Cut through connecting pipe with body saw e.g. V.A.G 1523 at right angles at the separating point.



Separating point ◆ For repair cases ◆ When replacing rear silencer ◆ Marked by three impressions on circumference of connecting pipe ◆ Central and rear silencer are installed as one part as standard. In repair cases the central and rear silencer are supplied individually and a repair connecting pipe with two clamps supplied as joint. ◆ Cut through connecting pipe with body saw e.g. V.A.G 1523 at right angles at the separating point. Dimension -b- = approx. 10 mm Dimension-a- = ca. 5 mm



Marking ◆ Three times on circumference Marking ◆ Three times on circumference ◆ S = Manual gearbox A = Auto. gearbox Repair connecting pipe Centre silencer

Volkswagen Workshop Service and Repair Manuals