|
Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system
Notes:
-
◆ Hose connections are secured with either screw, windlass or spring-type clips.
-
◆ Always replace clamp-type clips with spring or screw-type clips.
-
◆ Fuel hoses in engine compartment must only be secured with spring type clips. The use of clamp or screw type clips is not permissible.
-
◆ Assembly tool VAS 5024 or hose clip pliers V.A.G 1921 are recommended for fitting spring-type clips.
Observe safety precautions
.
Observe rules for cleanliness => Page 20-9
.
Adjusting throttle cable => Page 20-10
| 
