|
Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system
Notes:
-
◆ Hose connections are secured with the following types of clips, clamp type with retaining hook, spring type or clamp type with insert.
-
◆ Fuel hoses in engine compartment must only be secured with spring type clips. The use of clamp type with retaining hook or clamp type with insert is not permitted.
-
◆ Only clamp type with retaining hook or clamp type with insert can be used at connection (plastic pipe / fuel hose) on suspension turret.
-
◆ Hose connections are secured with spring-type clips. For fitting the spring-type clips commercial pliers e.g. Hazet 798-5 are recommended.
Observe safety precautions
Observe rules for cleanliness
=> Page 20-9
Adjusting throttle cable => Page 20-10
| 
