volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Parts of cooling system engine side > < Removing and installing parts of cooling system

Passat (B3)

6-cyl. fuel injection engine Mechanics
Removing and installing parts of cooling system
Parts of cooling system body side
 
N19-0013
  • 10 Nm
  • Cover
  • Lock carrier
  • Air ducting
  • Bracket
  • Radiator
    • ◆ Removing and installing
      =>Page 19-18
    • ◆ After replacing renew entire coolant
  • Rubber washer
  • V-belt
  • Expandable pin
 
N19-0013
  • Guide ring
    • ◆ Note fitting position
    • ◆ Secured on fan ring item 12 with clips
  • Additional fan
    • ◆ Removing and installing
      =>Page 19-18
  • Fan ring
  • Connector
  • Radiator fan
    • ◆ Removing and installing
      =>Page 19-18
  • Thermo-switch (F18), 35 Nm
    • ◆ For radiator fan, Pos. 14
    • ◆ Switching temperatures:
      Stage 1
           on: 92...97 °C
           off: 84...91 °C
      Stage 2
           on: 99...105 °C
           off: 91...98 °C
 
N19-0013
  • Lower coolant hose
    • ◆ To thermostat housing
      =>Page 19-8 , Item 19
  • Connection
  • O-ring
    • ◆ Renew
  • Retaining clip
    • ◆ Check seated securely
  • Upper coolant hose
    • ◆ From thermostat housing
      =>Page 19-8 , Pos. 18

Parts of cooling system engine side > < Removing and installing parts of cooling system