volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Servicing injection pump > < Rules for cleanliness
Diesel direct injection and glow plug system
Servicing Diesel direct injection system
Fitting locations overview
 
N23-0010

Components A to D are not shown on the illustration.

  •      A -     Brake pedal switch (F)
    • ◆ In footwell on brake pedal
  •      B -     Brake light switch (F47)
    • ◆ In footwell on brake pedal
  •      C -     Accelerator pedal position sender (G79)
    • ◆ In footwell on accelerator
      =>Page 23-14
  •      D -     Altitude sender (F96)
    • ◆ Up to 08.94: In footwell next to accelerator position sender
      =>Page 23-14
    • ◆ From 08.94: In Diesel direct injection system control unit (J248)
 
N23-0010
  • Diesel direct injection system control unit (J248)
    • ◆ With sender for intake manifold pressure (G71)
    • ◆ From 08.94: With altitude sender (F96)
  • Fuel cut-off valve (N109)
  • Injector with needle lift sender (G80)
  • Coolant temperature sender (G62)
  • Connector
    • ◆ For needle lift sender (G80)
  • Supplementary heater element relay (J325)
  • Boost pressure control solenoid valve (N75)
 
N23-0010
  • Intake manifold temperature sender (G72)
  • Connector
    • ◆ For engine speed sender (G28)
  • Connector
    • ◆ For fuel temperature sender (G81)
    • ◆ For quantity adjuster (N146)
    • ◆ For modulating piston movement sender (G149)
  • Connector
    • ◆ For fuel shut-off valve (N109)
    • ◆ For commencement of injection valve (N108)
 
N23-0010
  • Injection pump quantity adjuster
    • ◆ With fuel temperature sender
    • ◆ With quantity adjuster (N146)
    • ◆ With modulating piston movement sender (G149)
  • Exhaust gas recirculation valve (N18)
  • Air mass meter (G70)

Servicing injection pump > < Rules for cleanliness