volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking ignition transformer output stage > < Checking Hall sender

Passat (B3)

Mono-Motronic Injection and Ignition system
Mono-Motronic injection and ignition system
Checking ignition transformer
  • ‒ Pull connector and H.T. cable off ignition transformer (N152).
 
V28-0825
  • ‒ → Check primary resistance with hand multimeter V.A.G 1526 between terminals 1 and 15.
         Specification: 0.5...0.7 ω
  • ‒ Check secondary resistance with hand multimeter between terminals 4 and 15.
         Specification: 3...4 kω

If the specifications are not attained:

  • ‒ Remove ignition transformer and unscrew the ignition transformer output stage (N157) .
  • ‒ Repeat check.
<SOURCEMARKET> </SOURCEMARKET> <SOURCESYSTEM> </SOURCESYSTEM>

Checking ignition transformer output stage > < Checking Hall sender