volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing > < Removing and installing hydraulic unit (LHD)
Removing
Removing
–  Disconnect battery earth strap.
–  Disconnect all electrical connections on ABS unit.
–  Draw off as much brake fluid as possible from brake fluid reservoir using a suction bottle.
–  Disconnect brake lines on ABS unit and seal threaded holes with plugs from repair set Part No. 1H0 698 311.
–  Remove left trim below dash panel.
–  Separate brake pedal from brake servo → Chapter.
–  Remove brake servo hexagon nuts on bulkhead.
–  Carefully remove hydraulic unit, brake servo with brake master cylinder from engine compartment.
   

Installing > < Removing and installing hydraulic unit (LHD)