Volkswagen Workshop Service and Repair Manuals > Passat (B3) > Running gear self-diagnosis | Self diagnosis, V.A.G Inspection Service | Electrical check of the ABS and ABS/ EDL Teves 20 GI | Test prerequisites

Multi-pin connector with contact assignment > < Electrical check of the ABS and ABS/ EDL Teves 20 GI

Running gear self-diagnosis

Electrical check of the ABS and ABS/ EDL Teves 20 GI

Test prerequisites

● Fuses S16, S20, S123 and S124 must be OK (remove fuses from fuse holder to check).

N01-0018

● Switch ignition and electrical consumers off before commencing the check (headlights, lighting, fan ...).
● → Pull multi-pin connector off control unit (J104) and connect test box V.A.G 1598/21 -1- to wiring loom connector -2-.

The specified values are matched to the V.A.G 1526 and are not necessarily applicable for other test units.

Running gear self-diagnosis
Self diagnosis, V.A.G Inspection Service
Electrical check of the ABS and ABS/ EDL Teves 20 GI
Test prerequisites

Multi-pin connector with contact assignment > < Electrical check of the ABS and ABS/ EDL Teves 20 GI