volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing lock cylinder > < Removing and installing steering lock housing

Passat (B3)

Removing and installing turn signal and windscreen wiper switches
Removing and installing turn signal and windscreen wiper switches
Removing:
–  Remove steering wheel.
   
–  Remove securing bolts -arrows-.
–  Disconnect connectors for turn signal and windscreen wiper switch.
–  Pull off turn signal and windscreen wiper switch from steering column.
  V94-0586
Installing:
–  Slide steering lock housing on steering column.
–  Drive contact ring, spring and securing clip onto steering column with tool -VW 420--1-
  Note
t  If the steering column does not project fully out of the column tube, pull steering column out further using fitted hexagon nut.
t  For vehicles with ignition key withdrawal lock: → Automatic gearbox; Rep. Gr. 37; Repairing selector mechanism
  V94-0587

Removing and installing lock cylinder > < Removing and installing steering lock housing