volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Door Handle And Door Lock, Assembly Overview|Page 11970 > < Door Handle And Door Lock, Assembly Overview|Page 11968
Page 4
background image

-

Unclip clips for electrical wires from rear side of assembly carrier.

Installing

-

Retrofit cover for all vehicles --> 09.99.

-

Insert spreader plug - 2 - and spreader pin - 1 - into window.

-

Place projecting end of spreader plug on both sides of window.

-

Guide door window into door.

-

Insert assembly carrier into door.

-

Insert bolts and tighten in specified sequence, tightening torque: 8 Nm.

-

Installing door window, see installing door window to window regulator.

Door Handle And Door Lock, Assembly Overview|Page 11970 > < Door Handle And Door Lock, Assembly Overview|Page 11968