Passat L4-1.8L Turbo (AWM) (2004)
5
-
Lock
-
Removing:
- Remove trim for trunk lid.
- Disconnect harness connector from lock.
- Unclip Bowden cable - 3 - and - 8 -, remove nuts - 4 - and remove lock from trunk lid.
6
-
Pop rivet
-
Pull in using Pop rivet tongs V.A.G 1765 A
7
-
Actuator lever
-
On lock
8
-
Bowden cable
-
From lock to emergency release lever.
9
-
Securing clip
-
Locked in plate.
10
-
Motor to unlock rear lid V139
-
Removing:
- Remove lock cylinder carrier - 1 -.
- Unbolt motor and remove.
11
-
Actuator lever
-
On lock cylinder carrier.
Tailgate Lock And Lock Cylinder Carrier, Removing and Installing
Tailgate Lock And Lock Cylinder Carrier, Removing And Installing 10.00 -->
1
-
Lock cylinder carrier
-
Removing.
- Disconnect harness connectors for license plate light, positioning motor for central locking system and switch on lock cylinder.