Passat L4-1.8L Turbo (AWM) (2004)
/Page-3151004.png)
-
Work out cut-out in molded headliner - 1 - for front eyelet - 2 - on both sides using workshop tools.
-
Install front eyelet - 2 - on both sides using bolt - 3 - and press cap - 4 - into head bolt. Tightening torque: 23 Nm
-
Work out cut-out in molded headliner - 1 - for rear eyelet - 2 - on both sides using workshop tools.
-
Install rear eyelet - 2 - on both sides using bolt - 3 - and press cap - 4 - into head bolt. Tightening torque: 23 Nm
-
Install molded headliner and trim completely.
