Passat L4-1.8L Turbo (AWM) (2004)
/Page-2331004.png)
Note:
^
Use only appropriate solvents to clean brake parts.
^
When carrying out repairs install all parts supplied in repair kit.
^
New brake calipers are filled with brake fluid and are pre-bled.
^
Apply thin coat of installing paste G 052 150 A2 to brake cylinders, pistons and seals.
1 - Protective cap
^
Push onto bleed valve
2 - Bleed valve
^
Apply thin coat of assembly paste G 052 150 A2 to threads before screwing in
3 - Brake caliper housing
WARNING! Do not separate the two housing halves (multipoint socket head bolts). If the protective caps of the guide pins are damaged, replace
caliper.
4 - Seal
^
Removing and installing, Refer to Front Caliper Piston, Removing and Installing
5 - Piston
^
Removing and installing, Refer to Front Caliper Piston, Removing and Installing
^
Apply thin coat of paste G 052 150 A2 to piston before installing
6 - Protective cap
^
Do not damage when installing piston
Front Caliper Piston, Removing and Installing
Front caliper piston, removing and installing
Special tools and equipment
