Passat L4-1.8L Turbo (AWM) (2004)
^
Screw piston into housing by turning knurled wheel clockwise.
Note:
^
Install special tool 3272 so that the collar of the tool rest on special tool 3272/1.
^
For piston that are difficult to move, use open-end wrench (use 13 mm) on flats (arrow A).
^
Install brake pads.
Pre-bleeding brake caliper
^
Open bleed valve -arrow A- and fill with brake fluid, using a standard bleeder bottle until bubble-free brake fluid flows from the threaded hole
-arrow B- (brake hose connection). Close bleed valve.
Note: Position brake caliper as illustrated to pre-bleed.