Passat L4-1.8L Turbo (AWM) (2004)
/Page-748005.png)
-
Alternating in diagonal sequence, tighten bearing caps 2 and 4 of intake and exhaust camshafts slightly and tighten to 10 Nm (pay attention to
bushing).
-
Install both bearing caps from chain gears on intake and exhaust camshafts. Check camshaft for proper adjustment and tighten bearing cap to 10
Nm (pay attention to bushing).
-
The two camshaft markings must align with both arrows on bearing caps -arrows-.
-
Remove 3366 bracket-tensioner.
