Passat L4-1.8L Turbo (AWM) (2004)
Drive Belt: Procedures
A/C
Special tools and equipment
^
VAG1331 torque wrench (5 to 50 Nm)
Note: Before removing ribbed belt, note direction of rotation with chalk or felt-tip marker. When installing the ribbed belt, make sure it is seated
correctly on the pulleys.
Removing
-
Bring the lock carrier into service position: See: Body and Frame/Lock Carrier/Service and Repair/Procedures
-
Loosen securing bolts for ribbed belt tensioner for A/C compressor and remove ribbed belt.
Installing
^
Install ribbed belt for A/C compressor.
^
Place the torque wrench in 7 o'clock position (30 from vertical) and tighten belt tensioner to 30 Nm. Hold torque wrench securely and tighten bolts
-A- to 20 Nm.
Ribbed Belt Routing