Passat L4-1.8L Turbo (AWM) (2004)
Timing Belt Tensioner: Technical Service Bulletins
Engine - Timing Belt Tensioner/Roller Precautions
Condition
Toothed Belt, Belt Tensioner and Tensioning Roller Application CAUTION
15 07 02 Jan. 19, 2007 2010616, supersedes Technical Bulletin Group 15, number 04-02, dated Sep. 22, 2004 due to inclusion in ElsaWeb.
Technical Background
Improper application of toothed (timing) belt, belt tensioner and tensioning roller for 1.8T engine codes:
-
AEB, ATW (153 tooth timing belt)
-
AUG (150 tooth timing belt)
-
AWM (150 tooth timing belt)
Production Solution
N/A
Service
NOTE:
These engine codes use unique timing belts, belt tensioners and tensioning rollers, which are not interchangeable.
Warranty
Information only
If vehicle is under Warranty:
Use applicable SRTs from ElsaWeb or A-Time as outlined in the Warranty Policies and Procedures Guide.
Required Parts and Tools
No Special Tools required
No Special Parts required (always refer to specific engine codes in ETKA to determine correct part numbers for timing belt, belt tensioner and tensioning
roller configurations