Passat L4-1.8L Turbo (AWM) (2004)
Center Mounted Brake Lamp: Service and Repair
High-Mount Brake Light -M25- Wagon
High-mount Brake Light -M25- - Wagon From 10.00
Bulb holder, removing and installing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Remove screws -arrowsA-, unclip trim -arrowsB- and remove.
-
Depress locking clips -arrows- and remove bulb holder -1- from mounting -2-.
NOTE: The bulb holder base plate contains soldered-in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction,
replace complete bulb holder.