Passat L4-1.8L Turbo (AWM) (2004)
/Page-583010.png)
^
Position axle lift under front jacking points and raise vehicle.
^
Install adapter V.A.G. 1925/6 onto adapters V.A.G. 1925/3 or V.A.G. 1925/4 of spacer gauge.
^
Lower vehicle onto adapter.
The vehicle is now in the initial position.
Vehicles with heavy duty suspension 1BB/1BP, 1BF
^
Install spacer V.A.G 1925- using adapters V.A.G 1925/3 or V.A.G 1925/4 and V.A.G 1925/6.
^
Screw both threaded spindles out until they rest against the subframe front bolts - arrow -.
The vehicle must not be raised by doing this!
The vehicle is now in the initial position.
All types of suspension are checked in this position by the measurement program in the wheel alignment computer to ensure that the actual toe value
of each wheel conforms to specifications.
If necessary, the toe must be corrected.
Setting toe on front axle to start position.
Specifications for wheel alignment.
The alignment program will display a message only if a correction is necessary.
