Passat L4-1.8L Turbo (AWM) (2004)
to move it.
^
Remove noise insulation tray.
^
Loosen hex bolts - 1 -, - 2 -, - 5 -, - 6 -, - 7 - and - 8 -.
^
Move subframe with a plastic coated pry bar until the specified value for camber is achieved.
CAUTION: Do not damage components or their surface protection.
^
Screw in new hex bolts - 7 - and - 8 -.
^
Screw in new front hex bolts - 5 - and - 6 - and tighten
^
Tighten new hex bolts - 1 -, - 2 -, - 3 - and - 4 -.
^
Install sound insulation below engine/transmission.
CAUTION: The toe must be checked after each camber adjustment.
Rear Axle Camber (Vehicles With Front-Wheel Drive), Checking
Rear axle camber (vehicles with front-wheel drive), checking
The camber can be checked but not adjusted on vehicles with front wheel drive.