volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Manufacturer's Scan Tool|Page 6912 > < Diagram Information and Instructions|Page 6907
Page 1
background image

Intake Air Control Valve: Testing and Inspection
Manufacturer's Scan Tool

Recirculating valve for turbocharger, checking 

Valve opens between connection to intake manifold and connection to deceleration shutoff valve with no voltage Connection to vacuum reservoir is
closed.

Test requirement 

Not for engine code AUG 
^

Output Diagnostic Test Mode (DTM) performed

Test sequence 
-

Switch ignition off.

-

Disconnect connector from recirculating valve for turbocharger -N249-.

-

Measure resistance between terminals of valve.

Specification: 25 to 35 ohms 

If specified value is not obtained:
-

Replace recirculating valve for turbocharger -N249-.

Manufacturer's Scan Tool|Page 6912 > < Diagram Information and Instructions|Page 6907