Passat L4-1.8L Turbo (AWM) (2004)
Transmission Position Switch/Sensor: Service and Repair
01V, 5 SPD. A/T (FWD)
Multi-function Transmission Range (TR) switch -F125-, replacing, 01V, 5 SPD. A/T (FWD)
Removing
-
Remove left wheel.
-
Remove left-hand transmission bracket.
-
Unscrew bolts and detach multi-function TR switch -F125- from transmission; pull switch off selector shaft.
Installing
Place multi-function TR switch -F125- centrally on selector shaft. Do not tilt or use force when installing. Danger of damaging switch contacts.
-
Install multi-function TR switch -F125- on selector shaft: the flat section in the splines in switch -3- must coincide with the flat section on selector
shaft -1-.
-
Turn switch so that drilling -4- on switch housing can be installed on locating pin -2- on transmission housing.
-
Bolt multi-function TR switch -F125- to transmission and tighten.
-
Install left-hand transmission bracket.
-
Remove left wheel.