Passat L4-1.8L Turbo (AWM) (2004)
/Page-1140002.png)
^
Connect Multi-Function Transmission Range (TR) Switch F125 to selector shaft. Flat part at splines in switch - 3 - must align with flat part of
selector shaft - 1 -.
^
Rotate switch until the alignment bore - 4 - at switch housing can be fitted on the alignment pin - 2 - at transmission housing.
^
Secure Multi-Function Transmission Range (TR) Switch F125 to transmission.
^
Install left transmission support.
Vehicles with TDI engine
^
Install noise insulation - arrows - for left drive axle to wheel housing.
Continued for all vehicles
^
Install left wheel.
^
Install noise insulation - arrows -.
^
In vehicles with auxiliary heater, bolt exhaust pipe firmly to noise insulation.
