Passat L4-1.8L Turbo (AWM) (2004)
/Page-1873002.png)
-
Connect Multi-Function Transmission Range (TR) Switch -F125- (-3-) to shift rod -1-.
-
Flat part at splines in Multi-Function Transmission Range (TR) Switch -3- must align with flat part of shift rod -1-.
-
Rotate multi-function switch -3- until the alignment bore -4- can be fitted on the alignment pin -2- at transmission housing.
-
Tighten mounting bolts for Multi-Function Transmission Range (TR) Switch.
Tightening torque: 8 Nm
Rest of installation is performed in the reverse order of removal.
-
Install left transmission support.
-
Connect harness connector -2- for Multi-Function Transmission Range (TR) Switch -F125- (-1-).
