Passat L4-1.8L Turbo (AWM) (2004)
-
Checking
11. Vent line
12. Supply line
-
Black
-
Clipped to side of fuel tank
-
Ensure seated tightly
-
Secure with clamps Parts catalog
13. Return line
-
Blue or with blue marking
-
Clipped to side of fuel tank
-
Ensure seated tightly
-
Secure with clamp Parts catalog
14. Connector
-
Black, 4-pin
-
For Fuel Level Sensor G and Fuel Pump (FP) -G6-
15. Union nut, 60 Nm
-
Use ring nut wrench 3217 for removal and installation
16. Fuel Level Sensor G
-
Clipped onto baffle housing in fuel tank
17. Flange
-
Note installed position on fuel tank
18. Supply line
-
Ensure seated tightly
19. Fuel delivery unit
-
Check fuel pump
-
Clean strainer if soiled
20. Oil seal
-
To install, place into opening of fuel tank dry
-
Replace if damaged
-
Moisten with fuel only when installing flange
21. 25 Nm
22. Bracket
-
For securing straps
-
Note installation position
23. Securing strap
-
Observe varying lengths
-
Installed position:
-
Locating point (hole) points in driving direction
24. Vent line
-
Ensure seated tightly
25. Vent line
-
From drip reservoir
26. Retaining ring
-
Fastened to body
27. 10 Nm
28. Fuel filter
-
Installed position: Arrow points in direction of flow
29. Supply line
-
Black
-
Ensure seated tightly
-
Secure with clamp Parts catalog
30. Fuel tank
-
Draining
-
Support using engine/transmission jack V.A.G 1383 A when removing
31. Vent line
-
From EVAP canister to Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
-
Clipped onto fuel tank
32. Return line
-
Ensure seated tightly
33. Drip reservoir
-
Clipped onto fuel filler tube
34. 25 Nm
35. O-ring
-
Replace if damaged