Passat L4-1.8L Turbo (AWM) (2004)
-
Check installation position of Fuel Supply Sensor 3 -G237.
-
Marking -2- on sensor must align with marking -1- on fuel tank.
-
Tighten union nut using ring nut spanner 3218.
-
Tightening torque: 60 Nm
-
Connect electrical connector.
-
Check Diagnostic Trouble Code (DTC) memory of all control modules, repair all stored malfunctions, and erase DTC memory Vehicle Diagnosis,
Testing and Information System VAS 5051; Guided Fault Finding; Vehicle System Test, or Vehicle Diagnosis and Service Information System
VAS 5052; On Board Diagnostic (OBD).