Passat L4-1.8L Turbo (AWM) (2004)
-
Reach into fuel tank and disengage catches - arrows - at bottom of the suction jet pump -2-
NOTE: Sensor is shown without fuel tank for the sake of illustration.
Installing Installation is performed in reverse order of removal. Note the following:
NOTE: Do not bend floater arm of Fuel Level Sensor 2 -G169- when installing.
-
Insert Fuel Level Sensor 2 -G169- -1- into fuel tank.
-
Connect suction jet pump -2- to sensor at inside of fuel tank. Catches must engage.
-
Connect 2-pin connector to inside of flange.
-
Insert new seal for flange, dry, into opening of fuel tank and coat only inner side (equipment flange) with fuel.