Passat L4-1.8L Turbo (AWM) (2004)
Note:
^
Check Clutch Pedal Switch F36 first.
^
Stop - A - must be located in front of section - B -.
^
Stop - C - is then located directly below take-up hook.
If this is not the case, plunger must not be pulled out.
This destroys clutch pedal switch.
Positions of stops - A - and - C - must be corrected:
^
Press in plunger until it stops - arrow 1 -.
^
At the same time, rotate upper part of clutch pedal switch in direction of - arrow 2 - until it stops.
^
Now, before installing Clutch Pedal Switch F36, pull out plunger - arrow - completely.
During installation of clutch pedal switch, clutch pedal always remains in rest position (not operated).
^
Guide Clutch Pedal Switch F36 through assembly hole, press against clutch pedal and secure by rotating 45° toward right.