Passat L4-1.8L Turbo (AWM) (2004)
-
First disconnect negative (-) terminal -arrow- from battery.
-
Then disconnect positive ( B+ ) terminal from battery.
Battery, reconnecting
CAUTION: In order to prevent damage to the battery housing, battery terminals must be placed on battery posts without using force (by hand only).
NOTE: Battery posts and terminals must no longer be greased.
-
Refit battery positive ( B+ ) terminal on battery positive post.
-
Torque positive ( B+ ) terminal clamp fastener to 5 Nm.
-
Only after the positive ( B+ ) terminal has been secured should the negative (-) terminal clamp be installed.
-
Torque negative (-) terminal clamp fastener to 5 Nm.
-
Perform work steps specified in table.
Work steps required after reconnecting battery