Passat L4-1.8L Turbo (AWM) (2004)
/Page-2451002.png)
-
Release socket drive -1- and pull off grip -2-.
-
Turn torque wrench grip -2- through 180 degrees and reinsert socket drive.
-
Set wrench direction of turn on socket drive to counter-clockwise.
-
Set torque wrench tightening torque to 80 Nm.
-
Fit 10 mm socket 3410 onto generator drive shaft.
-
Tighten nut at pulley with wrench and adapter 3400 while counter-holding generator drive with socket 3410 as illustrated.
-
Turn generator drive counter-clockwise and torque nut to 80 Nm.
-
Clip protective cap onto freewheel disc.
