Passat L4-1.8L Turbo (AWM) (2004)
/Page-2412003.png)
^
Push in plunger until stop - arrow 1 -.
^
At the same time, turn upper part of clutch pedal switch until stop in - direction of arrow 2 -
^
Before installing clutch pedal switch, remove plunger - arrow - completely.
When assembling clutch pedal switch, clutch pedal remains always in rest position (not operated).
^
Guide clutch pedal switch through assembly hole, press against the clutch pedal and secure by rotating 45° toward right.
^
Clutch pedal - 3 - must be in rest position (not operated). Plunger - arrow - of clutch pedal switch - 2 - is then rested against clutch pedal.
^
Connect connector - 1 - onto clutch pedal switch.
^
Install drivers side storage compartment.
