Passat L4-1.8L Turbo (AWM) (2004)
Steering lock must be dismantled if the steel wire cannot be guided into the drilling correctly.
-
Release lock cylinder securing lever using wire -arrow- and remove lock cylinder from steering lock housing.
1. Lock cylinder
2. Wire (approx. 0 1.2 mm)
3. Securing lever
Installing
-
Insert ignition key in lock cylinder and turn to position "ON".
-
Release securing lever using wire (approx. 0 1.2 mm) and insert lock cylinder into steering lock housing.
NOTE: Where applicable, ensure immobilizer induction coil electrical connection orientation in lock cylinder housing guide.
-
Where applicable, reconnect electrical connection for the induction coil for anti-theft immobilizer from lock cylinder.
-
Install steering column switches and upper/lower column trim pieces.
-
Reconnect battery.