Passat L4-1.8L Turbo (AWM) (2004)
-
Clamp off suction and return line using hose clamps 3094.
-
Remove hex bolt - 3 - and - 4 -
-
Pull out tie rod.
-
Remove plastic nut - arrow -
-
Pry out clips and take out cover.
-
Place oil tray under vehicle.
-
Remove return line banjo bolt (22 mm AF) from steering gear.
-
Remove pressure line banjo bolt (19 mm AF) -arrow from steering gear.
-
Remove steering gear bolts - 1 - , - 2 - and - 3 -
-
Take out steering gear through left-hand wheel housing (second mechanic required).
Installing